Configuration File Backup And Restoration - ZyXEL Communications NAS Series User Manual

The following table describes the labels in this screen.
Table 141 Protect > Restore: Step 4
LABEL
Step 3. Set a restore target and start restoring
Browse
Previous
Done

27.5 Configuration File Backup and Restoration

Use the Maintenance > Configuration menus to create a file of your NAS configurations such as
passwords, shares and volumes created, network settings and so on. If you're going to do some
major configuration changes, then it is advisable to create a configuration backup file. If things go
wrong after you make the configuration changes, you can always go back to the previous
configuration by restoring an earlier configuration file.
If you forgot the NAS password, then use the RESET button (see
the NAS to the factory default configuration.
Note: Configuration File Backup and Restoration does not affect data (your files and
folders), volumes on the NAS.
Chapter 27 Protect
DESCRIPTION
Click this to select a folder where you want to place the restored files.
• Volume - Select a volume from the list.
• Current Location - This is the location of the selected folder.
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Click Apply to save your settings and Cancel to close the screen.
Click this to go back to the previous screen.
Click this to run the restore process and go back to the Backup screen.
Cloud Storage User's Guide
336
Section 1.7 on page 17) to return