Install the devices of the system completely.
Check the a-, b- and P-wire against each other for short-circuit.
Switch on the mains voltage.
ISH3130 and ISW3130
ISH3130 and ISW3130 are in 2-wire operation when delivered and do not need to be con-
figured if the connection is realised according to the wiring example.
Further settings
Please see product information of the package components.
Configuration options
With the comfort indoor stations, an internal call is possible. This function is not pre-
configured. With the Service Device or the configuration software configo™, an internal
call can be programmed.
Please see product information of the indoor station.
Labeling the name plate glass
Please see product information of the front-door station.
The comfort indoor stations are allocated to the bell buttons ex works and do not need to
be programmed. If an indoor station has to be replaced, please take the information for
programming the bell buttons from the product information from the product information of
the comfort indoor station (repair) or front-door station.
Please see product information of the indoor station and front-door station.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
6
Commissioning
Settings
Programming bell buttons
Repair
Subject to technical changes.
PI_home-packs-uk.doc
07/2012
1A