Programming Of Bell Buttons; Basic Principle; Programming With The Service Device; Programming Steps Legend - TCS AVU14 0 Series Product Information

Basic principle

All devices at the TCS:BUS have a unique serial number. During programming this serial
number is transferred to the front-door station and linked to the bell button.

Programming with the Service Device

Utilise the simple 1 person programming with the TCS Service Device. You will not need
access to the in-house stations in the flats. The voltage supply is provided by connecting
the Service Device to the TCS:BUS. For more on the TCS Service Sevice see:
germany.de
If you do not have the Service Device, you can also program manually.

Programming steps legend

briefly press key
press key until
release key
continue
wait until
Delation tone
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone.: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
12

Programming of bell buttons

LED flashes slowly
LED flashes rapidly
NoProg tone
ring tone
Prog2 tone
Progsperr tone
Subject to change without notice.
PI_GB_AVU1_Art0016078_2v0.doc mi
05/2006
www.tcs-