Inspection Before Use - JLG 600S Operation And Safety Manual

IF THE EXTERNAL FALL ARREST SYSTEM IS USED TO ARREST A FALL OR IS OTHERWISE
DAMAGED, THE ENTIRE SYSTEM MUST BE REPLACED AND THE PLATFORM FULLY
INSPECTED BEFORE RETURNING TO SERVICE. REFER TO THE SERVICE MANUAL FOR
REMOVAL AND INSTALLATION PROCEDURES.
THE EXTERNAL FALL ARREST SYSTEM REQUIRES AN ANNUAL INSPECTION AND CERTI-
FICATION. THE ANNUAL INSPECTION AND CERTIFICATION MUST BE PERFORMED BY A
QUALIFIED PERSON OTHER THAN THE USER.
31215033

Inspection Before Use

The external fall arrest system must be inspected before each use of
the aerial work platform. Replace components if there are any signs
of wear or damage.
Before each use, perform a visual inspection of the following compo-
nents:
SECTION 6 - ACCESSORIES
6-17