SECTION 6 - ACCESSORIES
Safety Precautions
• Do not over load platform.
• Make sure no personnel are beneath platform.
• Keep lanyard attached at all times.
• Do not use electrical tools in extremely wet conditions.
• Use correct voltage for tool being used.
• Do not over load circuit.
Preparation and Inspection
• Ensure generator is secure, check condition of belt and
wiring.
Operation
Start engine, turn on generator, begin using.
6-4
6.7
SKYWELDER™
The welder is capable of TIG and Stick welding and is capable at
producing 200 Amps at 100% duty cycle or 250 Amps at 50%
duty cycle.
Welding Accessories
The platform will provide provisions for storing 12 ft. welding
leads consisting of a clamp and a stinger. A fire extinguisher will
also be provided.
31215033