6.12 Fall Arrest Platform; 6.13 Bolt-On External Fall Arrest - JLG 600S Operation And Safety Manual

SECTION 6 - ACCESSORIES

6.12 FALL ARREST PLATFORM

NOTE: Refer to JLG External Fall Arrest System manual (P/N-3128935)
for more detailed information.
The external fall arrest system is designed to provide a lanyard
attach point while allowing the operator to access areas outside
the platform. Exit/Enter the platform through the gate area only.
The system is designed for use by one person.
Personnel must use fall protection at all times. A full body harness
is required with lanyard not to exceed 6 ft. (1.8 M) in length, that
limits the maximum arrest force to 900 lbs. (408 kg) for the trans-
fastener type and 1350 lbs. (612 kg) for the shuttle type fall arrest
system.
DO NOT OPERATE ANY MACHINE FUNCTIONS WHILE OUTSIDE OF PLATFORM. BE
CAREFUL WHEN ENTERING/EXITING THE PLATFORM AT ELEVATION.
6-16

6.13 BOLT-ON EXTERNAL FALL ARREST

The bolt-on external fall arrest system is designed to provide a lan-
yard attach point while allowing the operator to access areas outside
the platform. Exit/Enter the platform through the gate area only. The
system is designed for use by one person.
Personnel must use fall protection at all times. A full body harness is
required with lanyard not to exceed 6 ft. (1.8 M) in length, that limits
the maximum arrest force to 900 lbs. (408 kg).
External Fall Arrest System capacity is 310 lb (140 kg) - one (1) person
maximum.
Do not move platform during use of the external fall arrest system.
DO NOT OPERATE ANY MACHINE FUNCTIONS WHILE OUTSIDE OF PLATFORM. BE
CAREFUL WHEN ENTERING/EXITING THE PLATFORM AT ELEVATION.
31215033