Ground Control Console Display Gauge; Splash Screen - JLG 600S Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS AND INDICATORS

Ground Control Console Display Gauge

(See Figure 3-9., Ground Control Console Display Gauge)
The Display Gauge shows engine hours, fuel level (if applicable),
and Diagnostic Trouble Codes (DTCs) from both the JLG Control
System and the engine control system. During machine start up,
with no active DTCs in the control system, the splash screen will
show for 3 seconds and then switch to main screen. If there is an
active DTC while powering up the machine, the splash screen will
show for 3 seconds, and then launch the Diagnostics Screen. The
indicator lamp will light when there is an active DTC in the Fault
Log.
Figure 3-6. Splash Screen
31215033 3-13