Accessory Ratings; Safety Precautions; Welding Characteristics - JLG 600S Operation And Safety Manual

Accessory Ratings

Welding
Input Power
Mode
3- Phase
Stick (SMAW)
TIG (GTAW)
1 -Phase

Safety Precautions

• Do not over load platform.
• De-rate the platform by 70lbs/32kg when welder is
installed IN the platform.
• Check for cracked welds and damage to welder supports.
• Check for proper and secure installation of welder and
bracket.
• Be certain no personnel are beneath platform.
31215033
Table 6-3. Welding Characteristics
Welding
Rated Output Amperage
Range
280 Amp at 31.2V.
35% Duty Cycle
5-250A
200 Amp at 28V.
100% Duty Cycle
200 Amp at 28V.
50% Duty Cycle
5-200 A
150 Amp at 28V.
100% Duty Cycle
Amps Input At Rated Load Output. 50/60 Hz
Maximum Open
Circuit Voltage
230 V 460 V
30.5 17
79VDC
20 11
35 ------
70VDC
34 ------
• Do not exit platform over rails or stand on rails.
• Keep lanyard attached at all times.
• Ensure correct polarity of leads.
• Use proper welding apparel.
• Use correct rod size and current settings.
• Do not use electrical cords without ground.
• Do not use electrical tools in water.
SECTION 6 - ACCESSORIES
575 V KVA KW
13 15.7 10
8 10.3 6.4
------ 9.8 6.5
------ 6.9 4.4
6-7