Tires; Hydraulic Oil; Tire Specifications; Mobilfluid 424 Specs - JLG 600S Operation And Safety Manual

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE

Tires

Table 7-8. Tire Specifications
Size
Load Range
Ply Rating
Tire Pressure

Hydraulic Oil

Table 7-9. Hydraulic Oil
HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
+0° to +180° F (-18° C to +83° C)
+0° F to +210° F (-18° C to +99° C)
+50° F to +210° F (+10° C to +210° C)
NOTE:
Hydraulic oils must have anti-wear qualities at least to API Ser-
vice Classification GL-3, and sufficient chemical stability for
mobile hydraulic system service. JLG Industries recommends
standard UTTO hydraulic oil, which has an SAE viscosity index of
152.
7-6
355/55D625 41/18LLx22.5
G G
14 14
Foam-Filled Foam-Filled
SAE VISCOSITY GRADE
10W
10W-20, 10W-30
20W-20
NOTE: When temperatures remain below 20° F (-7 degrees C), JLG
Industries recommends the use of Mobil DTE 10.
NOTE:
Aside from JLG recommendations, it is not advisable to mix oils
of different brands or types, as they may not contain the same
required additives or be of comparable viscosities.
Table 7-10. Mobilfluid 424 Specs
SAE Grade
ISO
Gravity, API
Density, Lb/Gal. 60°F
Pour Point, Max
Flash Point, Min.
Brookfield, cP at -18°C
at 40° C
at 100° C
Viscosity Index
10W30
55
29.0
7.35
-46°F (-43°C)
442°F (228°C)
Viscosity
2700
55 cSt
9.3 cSt
152
31215033