Battery Quick-Disconnect (If Equipped); Machine Safety System Override; 4.10 Skyguard Operation - JLG 600S Operation And Safety Manual

4.9

BATTERY QUICK-DISCONNECT (IF EQUIPPED)

Machines equipped with the battery quick-
disconnect allow all machine power to be
easily disconnected at the battery without
removing battery cables from the battery
posts. To disconnect power, locate the RED
quick-disconnect switch near the battery, and
turn it to the OFF position.
4.9 MACHINE SAFETY SYSTEM OVERRIDE (MSSO)(CE
ONLY)
The Machine Safety System Override (MSSO) is
used to override function controls for Emergency
Platform Retrieval only. Refer to Section 5.5,
Machine Safety System Override (MSSO)(CE Only)
for operating procedures.
31215033

4.10 SKYGUARD OPERATION

SkyGuard provides enhanced control panel protection. When the
SkyGuard sensor is activated, functions in use at the time of actu-
ation will reverse or cutout. The SkyGuard Function Table pro-
vides more details on these functions.
During activation, the horn will sound and the SkyGuard beacon
1702155A
(if equipped) will illuminate until sensor and footswitch are disen-
gaged.
If the SkyGuard sensor remains activated after function reversal
or cutout, depress and hold the SkyGuard Override Switch to
allow normal functions until the sensor is disengaged.
Consult the following illustrations to determine which type of
SkyGuard the machine has and how it is activated. Regardless of
type, SkyGuard function according to the SkyGuard Function
Table does not change.
SECTION 4 - MACHINE OPERATION
4-15