JLG 600S Operation And Safety Manual page 64

SECTION 3 - MACHINE CONTROLS AND INDICATORS
9. Glow Plug Indicator
Indicates the glow plugs are operating. After
turning on ignition, wait until light goes out
before cranking engine.
10. Fuel Level Indicator
Indicates the level of the fuel in the fuel tank.
11. Engine Emissions System Failure Indicator
Icon illuminates when there is a fault with the
Emissions After Treatment system.
12.
Level System Indicator
Indicates a fault in the electronic leveling system.
The fault indicator will flash and an alarm will
sound. All functions will default to creep if the boom is
extended past transport mode or elevated more than 8
degrees above horizontal.
3-24
13. Platform Overload Indicator
Indicates the platform has been overloaded.
14.
Wire Rope Service
F
When illuminated, the light indicates the wire
ropes are loose or broken and must be repaired
½
or adjusted prior to use.
15.
Engine Error Indicator
E
Indicates a fault with the engine and service is
required.
16. Diesel Particulate Filter (DPF) Indicator
Icon will illuminate when standstill exhaust
system cleaning is required.
31215033