JLG 600S Operation And Safety Manual page 48

SECTION 3 - MACHINE CONTROLS AND INDICATORS
ALWAYS POSITION EMERGENC Y STOP SWITCH TO THE 'OFF' POSITION (PUSHED IN)
WHEN MACHINE IS NOT IN USE.
7. Power/Emergency Stop Switch
A two-position red mushroom shaped switch
supplies power to Platform/Ground Select
switch when pulled out (on). When pushed in
(off ), power is shut off to the Platform/Ground Select switch.
NOTE:
When the Platform/Ground Select Switch is in the center posi-
tion, power is shut off to the controls at both operating consoles.
Remove the key to prevent the controls from being actuated.
8.
Platform/Ground Select Switch
The three position, key operated switch sup-
plies power to the platform control console
when positioned to Platform. With the switch
key turned to the Ground position only
ground controls are operable.
3-8
9. Machine Safety System Override (MSSO) (CE
Only)
Provides emergency override of function
controls that are locked out in the event of
Load Sense System activation.
NOTE:
On machines with diesel engines, when Glow Plug Indicator is
lighted (Yellow), wait until light goes out before cranking engine.
10. Engine Start/ Auxiliary Power Switch
To start the engine, the switch must be held
"Up" until the engine starts.
To use auxiliary power, the switch must be
held "Down" for duration of auxiliary pump
use.
31215033