4.16 Tie Down And Lifting - JLG 600S Operation And Safety Manual

4.16 TIE DOWN AND LIFTING

When transporting machine, boom must be in the stowed mode
with turntable lock pin engaged and machine securely tied down
to truck or trailer deck. Four tie down eyes are provided in the
frame slab, one at each corner of the machine.
If it becomes necessary to lift the machine using an overhead or
mobile crane, it is very important that the lifting devices are
attached only to the designated lifting eyes, and that the turnta-
ble lock pin is engaged. (See Figure 4-8., Lifting Chart)
31215033
SECTION 4 - MACHINE OPERATION
NOTE: Lifting eyes are provided at the rear in the frame slab and at the
top of the turntable near the boom pivot. Each of the four or
slings used for lifting machine must be adjusted individually so
machine remains level when elevated.
SECURE TURNTABLE WITH TURNTABLE LOCK BEFORE TRAVELING LONG DISTANCES
OR HAULING MACHINE ON TRUCK/TRAILER.
4-23