Chapter 3. Quick Installation Guide - TP-Link TD-W9970 User Manual

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your modem router using
Setup Wizard within minutes.
1. If the TCP/IP Protocol on your computer is set to a static IP address, you need to change it to
obtain an IP address automatically. Please refer to
detailed instruction.
2. To access the web management page, open a web browser and enter the default address
http://tplinkmodem.net
After a moment, a login window will appear. Enter
both in lower case. Then click

Note:
1) Do not mix up the username and password with your DSL account username and password which
are needed for PPP connections.
2) If the above screen does not pop up, it means that your Web-brows er has been set to a proxy. Go
to Tools Internet Options
→
the Using Proxy checkbox, and click
After your successful login, you will see the
3.
Setup.
in the address field of the browser.
Login or press the
Connections
→ →
OK to finish it.
Quick Setup
8
Appendix A: Configuring the PC
admin for the Username and Password,
Enter key.
LAN Settings, in the screen that appears, cancel
screen. Click
TD-W9970 User Guide
Quick
for more
Next to start Quick