2.
Enter the following data:
Destination IPv6 Address:
a static route.
Prefix Length:
The prefix length of the destination IPv6 address.
Gateway:
Type in the correct IPv6 Gateway address for the IPv6 Static Route.
Interface:
Select the Interface from the drop-down list.
Status:
Select
Enabled
3.
Click
Save
to make the settings effective.
To modify or delete an existing entry:
1.
Find the desired entry in the table.
2.
Click
Edit
as desired on the
Click
Enable/ Disabled Selected
Click
Delete Selected
4.12 Forwarding
There are four submenus under the Forwarding menu:
UPnP. Click any of them, and you will be able to configure the corresponding function.
4.12.1 Virtual Server
Go to
Forwarding
→
screen. Virtual servers can be used for setting up public services on your LAN. A virtual server is
defined as a service port, and all requests from Internet to this service port will be redirected to
The IPv6 address of the network or host that you want to assign to
or
Disabled
from the drop-down
Edit
column.
to make selected entries enabled/ disabled.
to delete the selected entries.
Virtual
Server, and then you can view and add virtual servers in the next
list.
Virtual
Server,
73
TD-W9970 User Guide
Port
Triggering,
DMZ
and