TP-Link TD-W9970 User Manual page 11

Name
(Power)
(DSL)
(Internet)
(Wireless)
(WPS)
(USB)
(LAN1-4)

Note:
1. If the DSL LED is off, please check your Internet connection first. Refer to
Modem Router for more information about how to make Internet connection correctly. If you have
already made a right connection, please contact your ISP to make sure if your Internet service is
available now.
Status
On
System start-up complete.
Flash
System starting up or device updating.
The modem router is off. Please ensure that the power adapter is
Off
connected correctly.
On
DSL line is synchronized and ready to use.
Flash
The DSL negotiation is in progress.
There is no connection to the DSL Port or DSL synchronization
Off
fails. Please refer to
On
The network is available with a successful Internet connection.
There is no successful Internet connection or the modem router
Off
is operating in Bridge mode. Please refer to
troubleshooting.
On
The wireless function is working properly.
Off The wireless function is disabled.
It turns on when a wireless device has been successfully
On/Off
connected to the network via WPS. After about 5 minutes, the
WPS LED will turn off.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS/RESET button on other wireless
Flash
devices that you want to add to the network while the LED is
flashing.
On
The USB device is identified and ready to use.
Flash
The USB device is being identified.
Off No USB device is plugged in to the USB port.
On
There is a device connected to this LAN port.
Off
There is no device connected to this LAN port.
Indication
Note 1 for troubleshooting.
3
TD-W9970 User Guide
Note 2
2.2 Connecting the
for