Port Triggering - TP-Link TD-W9970 User Manual


Note:
It is possible that you have a computer or server that has more than one type of available service. If so,
select another service, and type the same IP address for that computer or server.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Edit as desired on the
Click Enable/ Disabled Selected
Click Delete Selected

Note:
If you set the service port of the virt ual server as 80, you must set the Web management port on
System Tools Manage Control
→
there will be a conflict to disable the virtual

4.12.2 Port Triggering

Go to Forwarding
→
Some applications require multiple connections, like Internet games, video conferencing, Internet
telephoning and so on. Port Triggering is used for some of these applications that cannot work
with a pure NAT modem router.
To add a new rule, follow the steps below.
1. Click Add New, the next screen will pop-up as shown below.
2. Select a common application from the
Port field and the
does not have the application you need, enter the
3. Select the protocol used for Trigger Port from the
UDP, or All.
Edit column.
to make selected entries enabled/ disabled.
to delete selected entries.
page to be any other value except 80 such as 8080. Otherwise
server.
Port Triggering, you can view and add port triggering in the next screen.
Common Service Port
Open Ports field will be automatically filled. If the
drop-down list, then the
Trigger Port and the
Trigger Protocol
75
TD-W9970 User Guide
Trigger
Common Service Port
Open Ports manually.
drop-down list, either TCP,