Chapter 2: Hardware Installation Guide; System Requirement; Led Explanation; Rear-Panel - TP-Link TD-8610 User Manual

Chapter 2: Hardware Installation Guide

2.1 System requirement

Confirm your computer has been installed with networking interface card (NIC) before
connecting ADSL MODEM to your computer, with operating system supporting the
TCP/IP protocol.

2.2 LED explanation

The panel of ADSL MODEM includes one power button, one power indicator (RED) and
four function indicators (GREEN), and these five indicators are explained as chart 1-1:
Indicator Description
PWR Power
ADSL ADSL status
ALARM Mistake
ACT Data
LAN Ethernet

2.3 Rear-panel

ON/OFF: Turn on/off the ADSL MODEM's power.
Power (9VAC/0.8A input): please do not use any unknown power adaptor,
otherwise that may damage your ADSL MODEM.
RESET(reset default): First press push the reset button of MODEM, then turn on
the MODEM's power about three minuters. It will utilize the default manufacturer's
setting.
LAN: Connect with your computer's NIC.
LINE(WAN): Connect to the MODEM of Splitter or Connecting the telephone line.
TD-8610 External ADSL MODEM User Guide
Status Function Details
On Power OK
Off Power fail
Slow flash Self-detecting when power up
Quick flash Connecting to the telecom network
On Connection to telecom network OK
On There is mistake when ADSL transmitting
data or receiving data
Off ADSL normal
On There is data transmitting or receiving on
WAN port
Off No data transmitting or receiving on WAN
port
On
LAN port normal
Off
Connection on LAN port abnormal
Flash
Data transmitting or receiving on LAN port
Chart 1-1
- 4 -