Table of Contents
Advertisement
Chapter 2. Hardware Installation Guide
2.1 System requirement
Confirm your computer has been installed with networking interface card (NIC) before connecting
ADSL MODEM to your computer, with operating system supporting the TCP/IP protocol.
2.2 LED explanation
The panel of ADSL MODEM includes one power button, one power indicator (RED) and four
function indicators (GREEN), and these five indicators are explained as chart 1-1:
Name
Power
Act
Alarm
ADSL
LAN
Status
On
Power OK
Off
Power fail
On
There is data transmitting or receiving on WAN
port
Off
No data transmitting or receiving on WAN port
On
There is a mistake when ADSL is transmitting
data or receiving data
Off
ADSL normal
Slow flash
Self-detecting when power up
Quick flash
The LINE port is sending or receiving ADSL data
On
The LINE port has connected to ISP's network
Off
The LINE port is disconnected
On
LAN port is normal
Off
Connection on LAN port is abnormal
Flash
Data is transmitting or receiving on LAN port
TD-8610/8610B
Indication
Chart 1-1
3
External ADSL MODEM
Advertisement
Table of Contents
