Arp List - TP-Link TD-W9970 User Manual

When you want to add or modify an IP & MAC Binding entry, you can click
then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding
entry.
To add IP & MAC Binding entries, follow the steps below.
1. Click Add New.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click Save.
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click Edit as desired on the
Click Enable/ Disable Selected
Click Delete Selected

4.18.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries.
MAC Address: The MAC address of the controlled computer in the LAN.

IP Address: The assigned IP address of the controlled computer in the LAN.

Status: Indicates whether or not the MAC and IP addresses are bound.

Load/ Delete Selected:

Click Load Selected to load selected items to the IP & MAC Binding list.
Click Delete Selected
Edit column.
to make selected entries enabled or disabled.
to delete selected entries.
Load or delete the selected item to the IP & MAC Binding list.
to delete selected items.
93
TD-W9970 User Guide
Add New or Edit, and