Rule - TP-Link TD-W9970 User Manual

There are four submenus under the Firewall menu: Rule,
Click any of them, and you will be able to configure the corresponding function.

4.14.1 Rule

Go to Firewall→Rule, and then you can view and set Access Control rules in the screen as shown
below.
Enable Firewall: Select the check box to enable the Firewall function, so the Default Filtering

Rules can take effect.
Description: Here displays the description of the rule and this name is unique.

LAN Host: Here displays the host selected in the corresponding rule.

WAN Host: Here displays the WAN host selected in the corresponding rule.

Schedule: Here displays the schedule selected in the corresponding rule.

Status: Here displays the status of the rule, enabled or not.

Edit: Here you can edit or delete an existing rule.

Add New: Click to add a new rule entry.

Enable Selected:

Disable Selected:

Delete Selected: Click to delete the selected entries in the table.

The methods to add a new rule:
1. Click Add New and the next screen will pop up as shown below.
2. Give a name (e.g. Rule_1) for the rule in the
3. Select a host from the
4. Select a target from the
5. Select a schedule from the
6. In the Action field, select
Click to enable the selected rules in the list.
Click to disable the selected rules in the list.
LAN Host drop-down list or choose
WAN Host drop-sown list or choose
Schedule drop-down list or choose
Deny or Allow
LAN Host,
Description field.
Add LAN
Add WAN
to deny or allow your entry.
80
TD-W9970 User Guide
WAN Host and Schedule.
Host.
Host.
Add Schedule.