TP-Link TD-8616 Quick Installation Manual

Quick Installation Guide

ADSL2+ Modem
TD-8616
MODEL NO.

Package Contents

Power Adapter
TD-8616
Phone Cable x 2
Ethernet Cable
ADSL Splitter
7106504341 REV1.0.0

Hardware connection

Computer
2
Step 1: Connect your devices step by step following the gure.
Step 2: Power on all your devices and then check the LEDs
(especially the ADSL LED).

Connect to the Internet

1 Click Start -> Control Panel.
Resource CD
Click Network and Sharing Center.
2
ADSL2+ Modem
MODEL NO. TD-8616
QIG
Wall Socket
3
Phone Cable
Ethernet Cable
( Here we use Windows 7 as an example. )
Phone Cable
Splitter
PHONE MODEM
1
Status Indication
Name
The modem is powered on.
Power) On
ADSL line is synchronized and ready
On
to use.
(ADSL)
Flashing ADSL negotiation is in progress.
There is a device conneted to this LAN
On
port.
(LAN )
Flashing The modem is sending or receiving data
over this LAN port.
Click Set up a new connection or network.
3
Click Connect to the Internet, and then click Next.
4