TP-Link TD-W9970 User Manual page 62

You can also keep the default WPS Status as
the button of the new device in two minutes
Step 2:
Press and hold the WPS button of the client device directly.
Step 3: The WPS LED flashes for two minutes during the WPS process.
Step 4: When the WPS LED is on, the client device has successfully connected to the modem
router.
Refer back to your client device or its documentation for further instructions.
II. Enter the client device's PIN on the modem router
Use this method if your client device has a WPS PIN number.
Step 1: Keep the default WPS Status as
will appear.
Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then
click Connect
Step 3: Connect successfully
successfully connected to the modem router.
III. Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN number.
Step 1: On the client device, enter the PIN number listed on the modem router's WPS screen. (It
is also labeled on the bottom of the modem router.)
Step 2: The WPS LED flashes for two minutes during the WPS process.
Step 3: When the WPS LED is on, the client device has successfully connected to the modem
router.
and click Connect.
Enabled
button.
will appear on the screen, which means the client device has
Enabled and click Add
and click Add device, then the following screen
54
TD-W9970 User Guide
device. Then choose Press