Route Settings; Default Gateway; Static Route - TP-Link TD-W9970 User Manual

4.10 Route Settings

Choose Route Settings, it includes four
and RIP Settings. The detailed descriptions are provided below.

4.10.1 Default Gateway

Go to Route Settings
select a WAN Interface from the drop-down list as the system default gateway.
Click Add Interface, you can add WAN Interfaces.
Click Save to make the settings effective.

4.10.2 Static Route

Go to Route Settings
you to configure the static routes. A static route is a pre-determined path that network information
must travel to reach a specific host or network.
To add static routing entries:
1. Click Add New, and you will see the screen as shown below.
menus: Default
Default Gateway, you can see the Default Gateway screen. You can
→
Static Route. You can see the Static Route screen, this screen allows
→
Gateway, Static Route IPv6 Static Route
70
TD-W9970 User Guide