7.
In the
Status
field, select
8.
In the
Direction
field, select
9.
In the
Protocol
field, here are four options, All, TCP, UDP, and ICMP. Select one of them from
the drop-down list for the target.
10. Click Save.
4.14.2 LAN Host
Go to
Firewall
LAN
→
below.
Description:
Here displays the description of the host and this description is unique.
Address Info:
Here displays the information about the host. It can be IP or MAC.
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click
Add
New.
2.
In the
Mode
field, select IP Address or MAC Address.
If you select IP Address, please follow the steps below:
1) In
Description
2) In
IP Address
If you select MAC Address, please follow the steps below:
Enabled
or
Disabled
IN
or
OUT
from the drop-down list for the direction.
Host, and then you can view and set a Host list in the screen as shown
field, create a unique description for the host (e.g. Host_1).
field, enter the IP address.
to enable or disable your entry.
81
TD-W9970 User Guide