Wireless Security - TP-Link TD-W9970 User Manual

Step 4:
Refer back to your client device or its documentation for further instructions.

Note:
1)
The WPS LED on the modem router will light green for five minutes if the device has been
successfully added to the network.
2)
The WPS function cannot be configured if the wireless function of the modem rout er is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.

4.7.3 Wireless Security

Go to Wireless Wireless
→
network.
There are three wireless security modes supported by the modem router: WPA/WPA2 – Personal,
WPA/WPA2 – Enterprise, WEP (Wired Equivalent Privacy).
Disable Wireless Security:

But it's strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal:

passphrase. The modem router is configured by this security type by default.
Authentication Type:
•
drop-down list. The default setting is Auto, which can select
authentication type automatically based on the wireless station's capability and request.
Encryption: You can select Auto,
•
Security, you can configure the security settings of your wireless
If you do not want to use wireless security, check this radio button.
It's the WPA/WPA2 authentication type based on pre-shared
You can choose the type for the WPA/WPA2-Personal security on the
TKIP or AES
55
TD-W9970 User Guide
WPA-PSK
as Encryption.
or WPA2-PSK