Wps Settings - TP-Link TD-W9970 User Manual

:
Password If the AP your modem router is going to connect needs password, you need to fill

the password in this blank.
Click Save to make the settings effective.

4.7.2 WPS Settings

This section will guide you to add a new wireless device to an existing network quickly by
(also called QSS) function.
a). Choose WPS Settings, and you will see the next screen shown below.
WPS: Enable or disable the WPS function here.

Current PIN: The current value of the modem router's PIN is displayed here. The default PIN

of the modem router can be found in the label or User Guide.
Restore PIN: Restore the PIN of the modem router to its default.

Generate New PIN:

ensure the network security by generating a new PIN.
Add device: You can add a new device to the existing network manually by clicking this

button.
b). To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and modem router using either Push Button Configuration
(PBC) method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of the
new device for WPS function meanwhile.
I. Use PBC (Push Button Configuration) method
Use this method if your client device has a WPS button.
Step 1:
Press the WPS/RESET button and hold on 1 second on the back panel of the modem
router, as shown in the following figure.
Click to get a new random value for the modem router's PIN. You can
53
TD-W9970 User Guide
WPS