Ipv6 Lan Settings - TP-Link TD-W9970 User Manual

End IP Address:
•
The End IP Address must be smaller than 192.168.1.254. The default End IP Address is
192.168.1.254.
Leased Time:
•
allowed connection to the modem router with their current dynamic IP address. Enter the
amount of time in hours, then the user will be leased this dynamic IP address. After the
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP
address. The default is
The detailed configuration about DHCP server, please refer to section

4.4.5 IPv6 LAN Settings

Go to Network IPv6 LAN
→
router.
Address Auto-configuration Type:

your LAN. RADVD and DHCPv6 Server are provided.
1) If RADVD is selected, it doesn't need to be configured.
2) If DHCPv6 Server is selected, please complete the following parameters.
• Start IPv6 Address:
addresses.
Enter a value for the DHCP server to end with when issuing IP addresses.
The leased time is the amount of time in which a network user will be
1440 minutes.
Settings, you can configure LAN IPv6 interface for your modem
Select a type to assign IPv6 addresses to the computers in
Enter a value for the DHCPv6 server to start with when issuing IPv6
36
TD-W9970 User Guide
4.6 DHCP Server.