Usb Mass Storage; User Accounts - TP-Link TD-W9970 User Manual

4.9.1 USB Mass Storage

Go to USB Settings
→
modem router and view volume and share properties such as share name, capacity, status, and
action, etc. on this page as shown below.
Volume: The volume name of the USB drive the users have access to.

File System: The system of the USB drive.

Capacity: The storage capacity of the USB driver.

Status: Indicates the shared or non-shared status of the volume.

be shared, while
clicked, Inactive will be displayed in the Status field, which means volume cannot be shared.
Action: When the volume is shared, you can click the

when volume is non-shared, you can click
Click Disconnect to safely remove the USB storage device that is connected to USB port.

Note:
Before removing the USB storage device, you should click Disconnect to make sure that all your data
have been saved completely. Removing device directly may cause your USB storage device crashed.

4.9.2 User Accounts

You can specify the username and password for Storage Sharing and FTP Server users on this
page. Storage Sharing users can access the folders by entering the following URL into the
address field of your browser or Windows Explorer, such as \\192.168.1.1. FTP Server users can
log into the FTP Server via FTP Client.
USB Mass Storage, you can configure a USB disk drive attached to the
Standby means volume cannot be shared. If
Deactivate
Activate to share the volume.
63
TD-W9970 User Guide
Active means volume can
Deactivate in Action field is
to stop sharing the volume;