Ipv6 Lan Host; Ipv6 Wan Host - TP-Link TD-W9970 User Manual

9. In the Protocol field, here are four options, All, TCP, UDP, and ICMPv6. Select one of them
from the drop-down list for the target.
10. Click Save to make the settings effective.
Click Enable/Disable Selected
Click Delete Selected

4.15.2 IPv6 LAN Host

Go to IPv6 Firewall
→
shown below.
Description: Here displays the description of the host and this description is unique.

IPv6 Address Info:

Edit: To modify an existing entry.

To add a new entry, follow the steps below.
1. Click Add New, and you will see the screen as shown below.
2. Create a unique name for the host (e.g. Host_1) in the
3. Enter an IPv6 address in the
4. Enter the prefix length of the IPv6 address in the
5. Click Save to make the settings effective.
Click Delete Selected

4.15.3 IPv6 WAN Host

Go to IPv6 Firewall
→
shown below.
to make selected entries enabled or disabled.
to delete selected entries.
IPv6 LAN Host, and then you can view and set a Host list in the screen as
Here displays the information about the host.
IPv6 Address
to delete selected entries.
IPv6 WAN Host, and then you can view and set a Host list in the screen as
Description
field.
Prefix Length field.
86
TD-W9970 User Guide
field.