Disabling And Enabling Write Protection; Shutting Down The Device - Extron electronics Quantum Ultra Series User Manual

Disabling and Enabling Write Protection

Should you want to make changes to items on the C: drive, you must disable write
protection as follows:
1.
2.
To enable write protection:
1.
2.

Shutting Down the Device

If required, use one of the following methods to shut down the Quantum Ultra:
•
•
•
On the Control Panel, click the Disable Write Protection button (see figure 41,
, on page 42). The following restart prompt appears:
7
Figure 59. Restart Prompt for Disabling Write Protection
Click OK. The unit reboots. The button turns red, and its text changes to Enable
Write Protection.
Figure 60. Write Protection Disabled
Click the red Enable Write Protection button. The following prompt appears:
Figure 61. Restart Prompt for Enabling Write Protection
Click OK. The unit reboots and Write Protection is enabled.
When a keyboard, mouse, and monitor are attached, the Quantum Ultra can be shut
down via the Control Panel.
If logged into the Quantum Ultra operating system, momentarily press the rear panel
power switch.
Press and hold the rear panel power switch for 5 seconds (see
figure 8 on page 14).
Quantum Ultra Videowall Processing System • Operation
in figure 7 and
C
53