Starting the Configuration Program
To start using the VCS program:
1.
Open the software program either by double-clicking the VCS icon (shown
at right) if one was placed on your desktop during installation, or by
clicking Start > All Programs > Extron > Videowall Configuration
Software. The Start screen is displayed (see figure 66).
Figure 66.
2.
Select the radio button for your Quantum Ultra device (Quantum Ultra 305/610 or
Quantum Ultra Connect 84/128, see figure 66,
NOTE: You cannot proceed without selecting a device type.
3.
Click the Create button (
network and are the type of device selected in step 2. The Connection screen
displays a list of Quantum Ultra devices that are detected (see figure 67).
Figure 67.
Quantum Ultra Videowall Processing System • Remote Configuration and Control
VCS New Project Screen
). VCS searches for devices that are connected to the
2
Connection Screen
).
1
76