Buttons on the Control Panel
The following buttons give you access to set up and manage the Quantum Ultra via the
Control Panel (see figure 41).
Figure 41.
NOTE: Most of these tasks cause the unit to restart to complete them. For certain
•
•
•
•
•
•
•
•
The Control Panel window also contains the following status panels that enable
you to observe status and activity of each major component (see
previous page):
Hardware Status
1
Network Interface Status
2
System Status
3
Firmware Status
4
CPU Usage progress bar
5
Buttons on the Control Panel
actions, the unit may restart twice: once to disable write protection, and a
second time to finish applying the settings.
Add Picture Files (
) — Enables you to load image files (.bmp, .png, .tif, or .jpg)
1
to the Quantum Ultra D: drive (see
pictures are then available to display on the videowall (see the VCS Help File to add
images to the videowall project).
NOTE: This function is not available on the Quantum Ultra Connect models.
Update Password (
) — Enables you to update the hardware password to access
2
the Quantum Ultra Control Panel
Update Firmware (
) — Provides options to install new firmware or roll back to a
3
previous version (see
Updating Firmware
Network Settings (
) — Displays the Network Settings window, from which you
4
can view or modify the IP addresses of the LAN A and LAN B ports (see
Network Settings from the Control Panel
Reset Device (
)— Enables you to reset the Quantum Ultra to different levels of the
5
default state (see
Resetting the Device from the Control Panel
Service Mode (
) — Provides access to the file system and a shortcut to the
6
operating system control panel, where you can update the date and time (see
Service Mode
on page 52).
Disable Write Protection (
desired (see
Disabling and Enabling Write Protection
Shut down (
) — Performs an orderly shutdown of the Quantum Ultra system (see
8
Shutting Down the Device
Quantum Ultra Videowall Processing System • Operation
Loading Image Files
(Updating the Password
on page 45).
on page 50).
) — Enables you to make changes on the C: drive if
7
on page 53).
figure 40
on the
on the next page). These
on page 44).
Modifying
on page 51).
on page 53).
42