Siemens Sinumerik 840D Operating Turning page 676

Section 2
Notes
B657
B657
Simple programming example
9. Enter the following values into the parameter win-
dow:
10. Acknowledge your input by pressing the VSK 8
"OK".
The two following program blocks are added to the
work schedule.
11. Now programme the retraction of the measuring
probe along a straight line at rapid traverse rate.
Press the HSK 2.2 "Strght Circle" to gain access to
the function "Straight".
Press the VSK 2 "Straight".
The input mask for die technology "Straight" opens:
Page 8 840D/828D SINUMERIK Operate