Siemens Sinumerik 840D Operating Turning page 589

Complex programming example
2. Confirm your inputs by pressing the VSK 8 "Accept".
The following program block "Program header" is
inserted into the program.:
3. Program now a milling machining.
Press the HSK 1.5 „Mill."to open the function
"Milling".
Press the VSK 2 "Pocket".
The work area for the technology "Pocket" opens.
Press the VSK 3 "Rectang. pocket", to open the pa-
rameter window for the rectangular pocket cycle.
The following parameter mask opens.
4. Enter the following values into the parameter mask:
To insert a tool into the parameter mask, press the
VSK 1 "Select tool".
Mark the desired tool (CUTTER_D8) in the tool list
with the orange selection cursor and press the
VSK 1 "To program".
Confirm your inputs by pressing the VSK 8 "Accept".
The following program block "Rectang. pocket" is
inserted into the program:
The program chain opens (see the downward
opened bracket on the right side of the programming
symbol).
840D/828D SINUMERIK Operate
Section 3
Notes