Siemens Sinumerik 840D Operating Turning page 353

Storage medium "NC"
3.11 Properties of programs and directories
By pressing the VSK 2.6 "Properties" in the ex-
tended vertical softkey bar the properties window
with security options for the selected program or
directory opens.
Note:
You can change the program name and the rights.
Parameters Meaning
Path and name: Program path and Program name of the selected file
(here the program SPIGOT.MPF in the Workpiece/
TEST-folder on the NC).
Created: Date and time of creation
Changed: Date and time since the last edit of the program.
Rights: User rights for executing, writing, listing and reading
of a program or directory.
7 protection levels are possible (level 1 highest pro-
tection level, level 7 the lowest).
Protection level 1 Manufacturer
Protection level 2 Service
Protection level 3 User
Protection level 4
Programmer
Protection level 5
Qualified worker
Protection level 6
Skilled worker
Protection level 7
Semi skilled worker
840D/828D SINUMERIK Operate
Protected by password
Protected by password
Protected by password
Key switch 3
Key switch 2
Key switch 1
Key switch 0
Section 3
Notes