Siemens Sinumerik 840D Operating Turning page 584

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

2.2 Programming example: Multi-edge spigot

The following ShopTurn program is to be programmed:

Create a new ShopTurn program like described in

section 2.1.

Give the program a name, for example

"ST_MILLING_1.MPF".

The input window for the program header opens.

Insert the values into the parameter mask like dis-

played below:

840D/828D SINUMERIK Operate

Sinumerik 828d