Siemens Sinumerik 840D Operating Turning page 404

Hide thumbs Also See for Sinumerik 840D:

Selecting the function "Alarm"

By pressing the VSK 7 "Alarm" the "Simulation

alarms" window opens, with a list of all current active

alarm messages that occured during the simulation.

For error messages and acknowledgement symbols

see module - B526 "Operating area Diagnostics",

6.6.2 Vertical softkey bar

Display area

By pressing the VSK 1 "Acknowl. Alarm" all with the

"Reset"- or "Cancel"-symbol marked alarm mes-

sages can be deleted. This softkey is inactive as

long as no appropriate error message is shown.

By pressing the VSK 2 "Simulation Power On" you

can trigger a warm restart for the active simulation.

Press the VSK 8 "OK" to confirm or the VSK 7

"Cancel" to abort the warm restart.

With a warm start the simulation will be ended and

started anew.

By pressing the VSK 8 "Back" you switch back to the

operating area "Program control".

840D/828D SINUMERIK Operate

Sinumerik 828d