Siemens Sinumerik 840D Operating Turning page 549

Hide thumbs Also See for Sinumerik 840D:

5.5.8 Rotating the C axis

Rotations of the C axis apply only in the current program.

Besides, you can select between a new and an additive rotation.

With a new rotation of the C axis, all rotations of the C axis defined so far

are deselected. An additive rotation works additional to the current se-

lected rotations.

You can turn the C axis through a specific angle to enable subsequent ma-

chining operations to be performed at a particular position on the end face

or peripheral surface.

The direction of rotation is set in a machine data code.

Enter the value for the rotation in degree.

5.5.8.1 Selecting the function "Rotation C axis"

By pressing the VSK 5 "Rotation C axis" the window

for rotating the C axis opens.

5.5.8.2 Parameters for „Rotation C axis"

Adds a new rotation

840D/828D SINUMERIK Operate

Help picture/animation

Sinumerik 828d