B516
1 Brief description
Aim of the module:
In this module you learn to recognise and understand the operating elements of the SINUMERIK Op-
erate.
Description of the module:
The general operation of a SIEMENS Operate will be described.
Depending on the machine manufacturer the following operating elements can be used:
Operator panels (OP)
CNC-full keyboard
Machine control panel (MCP)
840D/828D SINUMERIK Operate
840D/828D SINUMERIK Operate
Operating elements
This document was produced for training purposes.
Page 1
Siemens assumes no responsibility for its contents.
B516
B516