Siemens Sinumerik 840D Operating Turning page 539

Various
5.5.1 Selecting the function "Transformations"
By pressing the VSK 5 "Transformations" a new ver-
tical softkey bar opens on the left side of the screen
with the transformation functions, like displayed be-
low:
5.5.2 Vertical softkey bar
Display area Description
By pressing the VSK 1 "Work offset" the parameter
window for the work offset opens (see section 5.5.3).
By pressing the VSK 2 "Offset" the parameter win-
dow for the offset opens (see section 5.5.4).
By pressing the VSK 3 "Rotation" the parameter win-
dow for the rotations opens (see section 5.5.5).
By pressing the VSK 4 "Scaling" the parameter win-
dow for the scaling opens (see section 5.5.6).
By pressing the VSK 5 "Mirroring" the parameter
window for the mirroring opens (see section 5.5.7).
By pressing the VSK 6 "Rotation C axis" the parame-
ter window for the rotation of the C axis opens (see
section 5.5.7).
By pressing the VSK 8 "Back" you switch back to
the main screen of the function "Various".
840D/828D SINUMERIK Operate
Section 5
Notes