Rear Wheel Maintenance - Invacare Cetus Service Manual

Cetus
Please refer back in reverse for reassembly and
replacement.
Caution:
When reassembling the speedometer drive,
please note the direction of the slot before
fixing.
If the control panel shows the abnormal rotating
speed, please first check whether the
connectors on both ends of the speedometer
cable are fixed. Refer to 3-3 Control panel
maintenance.
If the connectors on both ends of the
speedometer cable are normal, the
speedometer drive may be faulty. Please
replace with a new one.
7-3

Rear wheel maintenance:

Socket wrench 17 x 1pcs
Allen wrench 8 x 1pcs
1. Refer to 2-1 Battery power-off: The scooter is
powered off.
2. Please keep the rear wheel of the scooter
suspending in midair.
3. Remove the nut cover of the rim outside.
4. Remove the lock nut (M10) and the spacer.
5. Pull out the rear wheel.
There is a "key" in the middle of the rim.
6.
Please remove and keep it properly.
S81201-92800~A
7. By this step the tire can be replaced.
8. Loosen the rim lock screws (M10 x 35L x
3pcs).
9. The rim can be separated from the tire.
The left/right rear wheels can be disassembled in
the same way.
Please refer back in reverse for reassembly and
replacement.
Caution:
Standard rear tire specifications:
•
Tire pressure: 35-40 psi
•
Tread pattern standard: 0.5 mm or
more
Service Manual
29