Table of Contents
Advertisement
Cetus
6. Remove the locking screw (M3 x 6L x 2pcs)
from the holder.
7. The gyroscope can be removed.
Please refer backward for reassembly and
replacement.
4-6
Headlight maintenance:
Cross screwdriver x 1pcs
1.
Refer to 2-1 Battery power-off: The scooter is
powered off.
2.
Please refer to 4-1 Front slanting
maintenance: remove the front slanting.
3.
Remove the headlight connector.
S81201-92800~A
4.
Remove the front slanting screws (M4 x 12L x
1pcs).
5.
Remove the headlights from the slot.
Please refer backward for reassembly and
replacement.
Caution:
If the headlights are faulty, please check if the
headlight connectors and the cable are
abnormal. If there is no problem, the bulb may
be burnt out. Please replace with a new one
directly.
4-7
Front turn light maintenance:
Cross screwdriver x 1pcs
1.
Refer to 2-1 Battery power-off: The scooter is
powered off.
2.
Please refer to 4-1 Front slanting
maintenance: remove the front slanting.
3.
Remove the front (left) turn light connector on
the front compartment.
Service Manual
19
Advertisement
Table of Contents
