Table of Contents
Advertisement
Cetus
Caution:
Please insert the brake cable through the
locking screw of the brake plate and lock the
brake cable. If it is not tightly locked, it may
cause a brake system failure or the scooter to
behave abnormal.
The other end of the brake cable will be
connected to the head brake handle. If the end
wiring is in normal condition, it may be that the
head brake handle is abnormally connected.
In case that the electromagnetic brake
abnormality has nothing to do with the brake
plate / brake cable, if it is needed to repair the
electromagnetic brake, please refer to the
electromagnetic brake repair.
In case of brake failure, check whether the
brake cable and the adjustment line are normal.
The brake plate may be damaged or worn out.
Please replace with a new brake plate.
7-5
Left/right brake plate
maintenance:
Hex wrench 10 x 1pcs
Cross screwdriver x 1pcs
1.
Refer to 2-1 Battery power-off: The scooter is
powered off.
2.
Please refer to 7-4 Left/right brake
adjustment:
3.
Loosen the right brake adjustment screw.
S81201-92800~A
4.
Pull out the right brake cable and the spring.
5.
Remove the brake plate locking screw (M6
x12L x 1pcs).
6.
The brake plate set can be removed.
The left/right brake plate can be disassembled in the
same way.
Please refer back in reverse for reassembly and
replacement.
7-6
Brake handle maintenance:
Cross screwdriver x 1pcs
Hex wrench 8 x 1pcs
1.
Refer to 2-1 Battery power-off: The scooter is
powered off.
2.
Remove the fixing screw set (M5 x 20L
x 1pcs).
3.
Remove the brake cable.
4.
The brake handle can be removed.
Service Manual
31
Advertisement
Table of Contents
