Table of Contents
Advertisement
Cetus
4. The trace extends to the right side of the lower
center bar bead-bowl nut. Cut the upper fixed
strap (x 1pcs).
5. The trace extends to the right side of the lower
front frame. Cut the upper fixed strap (x 1pcs).
6. The brake trace goes separately from the sides
of the frame to connect the left/right rear wheel
brake disks. Cut the upper fixed strap (x 4pcs).
7. Loosen the left/right brake adjustment screws.
S81201-92800~A
8. Pull out the left/right brake cable and the spring.
The entire brake cable can be taken out.
Please refer back in reverse for reassembly and
replacement.
Caution:
If the scooter's manual brake fails, please check
the brake disk first. If there is no abnormality,
check or replace the brake cable.
When the brake cable is reassembled or
replaced, be sure to retie the cut-open fixing
straps as described above. Fix it without
tightening too tightly.
Please let the brake line go in the right side of
the scooter, the left side is for the main line, and
the brake cable must be fixed on the right side
of the frame to avoid interference.
Service Manual
40
Advertisement
Table of Contents
