Table of Contents
Advertisement
Cetus
4.
Remove the front (left) turn light screws (M4
x12Lx3pcs).
5.
Take out the front (left) turn light from the slot.
The disassembly method of the left/right turn light is
the same.
Please refer back in reverse for reassembly and
replacement.
Caution:
If the turn light is faulty, please check if the turn
light connectors and the cable are abnormal. If
there is no problem, the bulb may be burnt out.
Please replace with a new one directly.
4-8
Main power switch set
maintenance:
Cross screwdriver x 1pcs
1.
Refer to 2-1 Battery power-off: The scooter is
powered off.
2.
Please refer to 4-1 Front slanting
maintenance: remove the front slanting.
3.
Remove the main power connector.
S81201-92800~A
4.
Remove the main power switch set from the
slot.
5.
The entire set of main power switches can be
pulled out.
Please refer back in reverse for reassembly and
replacement.
Caution:
If the main power switch set is damaged, please
replace with a new one directly. It is forbidden to
modify the main power switch set without
permission.
4-9
Charging block maintenance:
Cross screwdriver x 1pcs
1.
Refer to 2-1 Battery power-off: The scooter is
powered off.
2.
Please refer to 4-1 Front slanting
maintenance: remove the front slanting.
3.
Remove the charging block connector.
4.
Remove the charging block screws from the
front compartment (4 pcs).
Service Manual
20
Advertisement
Table of Contents
