Removing The Rollator Bracket; Positioning The Rear Reflector - Invacare Leo User Manual

Dolomite Legacy 600
Invacare Banjo
P452E/3
1506942-S

4.2.2 Removing the rollator bracket

1. Loosen the screws (1).
2. Pull the rollator bracket out of the fixtures.

4.2.3 Positioning the rear reflector

CAUTION!
Risk of accident due to poor visibility
If you wish to use your mobility device on public
roads and a rear reflector is required by national
legislation, then the rollator bracket may not
cover the rear reflector.
– Make sure that the rear reflector is mounted
in such a way that a sufficient amount of the
reflective area is visible.
Accessories
25