Table of Contents
Advertisement
Cetus
3.
The main line goes to the front of the steering
lever. Cut the upper strap (x 1pcs).
4.
The trace extends to the lower center bar
bead-bowl nut. Cut the upper band (x 1pcs).
5.
Find the relevant connector on the front of the
frame. Cut the straps (2 pcs).
Upper strap fastening: power connector /
charging base connector.
Lower strap fastening: headlight / steering
light connector.
S81201-92800~A
6.
Cut the main trace strap on the left side of the
front frame (x 2pcs).
7.
The main line passes through the groove at
the bottom of the frame. Please directly pull it
away from the groove.
8.
The main line extends to the top of the rear
frame and cuts the strap (x 1pcs).
The entire brake cable can be pulled out.
Please refer back in reverse for reassembly and
replacement.
Service Manual
38
Advertisement
Table of Contents
