Avaya S8700 Manual page 21

Check your shipment
When the order arrives at your site, check the contents (see
1
Inspect the shipping carton for damage before opening it. If the box is damaged, do not open it.
Inform the shipping company, and ask for instructions on filing a claim.
2
If the box is undamaged, check the contents against the packing slip. Check the condition of each
component, and note any damage or shortages on the packing slip. The carton should contain the
items in
3
Read and follow any directions inserted into the package by the factory.
Table 3: Required Hardware
Comcode/Code
108312612
108774696
700234032
– 700207111
– 700181118
1
The adapter has an amphenol connector on one side and an RJ45 connector on the other for
connecting to the network. See
2
Only if installing in old carriers or cabinets with WP cables.
Install a TN2302AP IP Media Processor
The TN2302AP consumes 16 watts of power and the power budget is 15 watts per slot. Do not fill every
available slot in a given media gateway (G650) or carrier (MCC1) with them. Use the following
guidelines:
•
G650—5 per media gateway
•
MCC1—18 per carrier
•
SCC1—16 per media gateway
•
G600—5 per media gateway
Have the following equipment on site before your shipment arrives:
•
An unoccupied port slot in the media gateway for each TN2302AP IP Media Processor
•
A 10 BaseT or 10/100 BaseT Ethernet connection into your local area network (LAN)
•
One or more valid, unused IP addresses on the network that can be assigned to the IP Media
Processor server. You also need the subnet mask and default gateway.
In addition to the TN2302AP IP Media Processor, you must also install and administer a C-LAN circuit
pack (TN799DP). For C-LAN installation and administration, refer to
15.
Adding New Hardware--S8700
November 2003
Required Hardware on page 21 for each TN2302AP IP Media Processor ordered.
Description
TN2302AP IP Media Processor (MedPro)
TN2302AP Amphenol Adapter
Migration kit (PEC code 63275):
– Upper circuit pack slot label
– Twisted pair I/O cables
TN2302AP Amphenol Adapter
NOTE:
The customer must provide one CAT5 or better cable for each TN2302AP.
NOTE:
Get this information from the project manager or the customer's network administrator.
Install and Administer IP Connectivity Hardware
Required Hardware on page 21).
Quantity
1or more
1
1/MedPro
2
1
10
on page 22.
TN799DP Control LAN on page
21