Avaya S8700 Manual page 64

Adding a port network
4
Type arp -d 192.11.13.6 and press
responds with one of the following:
•
•
5
Type telnet 192.11.13.6 and press
Prompt = [IPSI]:
6
Type ipsilogin and press
7
Log in as craft.
Prompt = [IPADMIN]:
8
Type set control interface ipaddr netmask and press Enter, where ipaddr is the customer-
provided IP address and netmask is the customer provided subnet mask.
9
Press Enter
64
The command line prompt when the cache has been cleared.
The phrase: The specified entry was not found. This is returned when the specified IP
address does not currently contain an entry in the ARP cache.
NOTE:
While connected to the IPSI, type help or ? to obtain online help. Most commands have
two or three letter abbreviations.
. (abbreviated command = il)
Enter
NOTE:
The craft login used on the IPSI has a different password than the craft login used on the
media servers.
to effect the changes.
to clear the ARP cache in the laptop. This command
Enter
Enter to open the Telnet window and connect to the IPSI
Adding New Hardware--S8700
November 2003